Event Calendar Malaysia

Rotating equipment play a major role in the overall system reliability and energy consumption of a process operation, making it a top priority of any maintenance and reliability department.

If you are part of a maintenance team looking to advance your rotating assets’ reliability, join this free learning webinar to learn how to establish condition-monitoring and predictive-maintenance practices to minimize downtime and improve efficiency of the equipment.

Topics that will be discussed during the seminar:

• Quickly and safely detect vacuum pressure leakage from a safe distance.
• Maintain accuracy of plant process sensors and efficiently test plant control loops.
• Ways to identify problems in instrumentations, rotating machineries, control systems and power quality.
• Advanced motor load efficiency test and motor-drive validation.
• Quick and safe location of partial discharge using acoustic imaging technology.

In this webinar, learn how we can use Indoor Air Quality Testing Tools to ensure machine is operating in a healthy environment. With environment ruled out as a cause of machine failure, use electrical test tools such as Digital Multimeters, Clamp Meters and Insulation Testers to identify:

1. Incoming electrical signals to understand measurement readings and determine if machine is working at optimum performance
2. Intermittent problems

Key learning points:

• The importance of temperature, humidity and differential pressure in the environment.
• How to use digital multimeters and clamp meters to identify intermittent problems.
• Why we need PI/DAR to test for insulation of motor?

The Industrial Ethernet is catching up over old communication technology today. With faster communication over Industrial Ethernet, the cabling infrastructure is left out with the old thinking “A Cable is just a Cable”. Today, Industrial Ethernet cabling systems are required to be Certified under the right Standards to ensure smooth operations and endurability of the cable. The story after that would be maintaining these cable systems to provide it’s “All the Time” connectivity for your Industrial Ethernet requirements.

Featured tools: MS2-100, MS-POE and DSX2-5000 (Live Demo)

Early detection of failure in your facility is crucial to ensure that the maintenance team is well prepared to overcome the failure in a matter of no time. In today`s IR4.0 Industry revolution, failure needs to be minimized to ensure smooth running of the facility and minimize revenue loss. This webinar offers the participants to bring back value experience on early detection of potential failure which will serve as the 1^st line of defense.

Topics covered:

• What is 1^st line of defense?
• What are the goals of 1^st line of defense and the advantages?
• Why opt for 1^st line of defense instead of scheduled and reactive maintenance?
• Thermography as the 1^st line of defense strategy
• Why Thermography instead of traditional inspection?
• Applications that thermography can be used

Featured tools: Fluke TI Series Thermal Imagers

Smooth plant operation is all proven to be vital to maximize an organization’s revenue and meet the end user demands. In today’s world, it is impossible to find a plant with zero problem. One of the main factors that leads to interruption in a plant’s operation is electrical failure. There are various electrical failures that take place in a plant which could lead to a loss of revenue, high cost of asset replacement, higher maintenance cost and worse, loss of lives. In this webinar, find out how we can detect the root cause of the electrical issues in the plant and ways to overcome this issue.

Topics covered:

• What are the factors that lead to a smooth plant operation?
• How do we determine if our plant is having a smooth operation?
• Why is smooth plant operation critical and what are the impacts of poor plant operation?
• Factors that lead to a poor plant operation and understanding the core issues of poor plant operation
• Overcoming your poor plant operation with analyzing and monitoring methods

Featured tools: Fluke 438, Fluke 1738

Electric motors will fail, sooner or later. Nearly half of all industrial motor failures result from internal electrical shorts caused by degraded insulation. In order to maximize a motor’s uptime and service life, the condition of its winding and ground-wall insulation must be tested regularly.

The industry requires the most comprehensive set of tests to analyze a motor’s entire insulation system. Portable, powerful, and configurable to meet the specific needs of motor shops, industrial maintenance teams and motor OEMs, the MEGGER Baker series offers the best value in motor test equipment available today. These analyzers deliver superior test capabilities in an easy-to-use instrument.

Featured tools: Megger Baker DX series, Megger Baker AWA-IV series, Megger Baker EXP4000

Today, many still think that continuity would be enough to ‘Pass’ an Ethernet Cable/Network Cable in their premise. The copper cable used today are able to carry up to 40Gigs of data as per the requirement of a Datacenter Cat 8.2 cabling systems over 10Megs in the 80s. So, the testing requirements are also ‘tightened’ to ensure it meets many performance criteria to provide that smoothness in flow of signals in today’s extremely fast network connectivity requirements. What are the tools available from basic maintenance testing, right up to cable Certifications to meet these criteria? Join us in this session to find out more.

Featured tools: MS2-100, MS-POE and DSX2-5000 (Live Demo)

For underground power cables, and particularly for cables in the Electrical Power, an undamaged cable is ideally an important prerequisite to avoid serious cable faults which would influence the quality of supply. Fault location systems have to meet steep requirements to be considered truly portable and thus, outdoor-ready for use in the field. The equipment involved must redefine the state-of-the-art as a complete package, which includes all necessary fault locating components fully integrated in a single robust housing.

Featured tools: MFM10, STX40, DIGIPHONE+

Partial Discharge (PD) could be a silent killer of your plant, which could lead to catastrophic failure of your high voltage assets. The main 2 factors are due to manufacturing defect and method of installation of our high voltage assets. Find out how you could quickly detect a partial discharge issue on your assets.

Topics covered:

• What is Partial Discharge?
• What are the effects of Partial Discharge?
• How can you detect Partial Discharge?
• The advantages of Partial Discharge detection
• Partial Discharge application

Featured tools: HVPD PDS Insight 2

Not many knows the right way to test a Fiber and it’s definitely not the ‘Live Testing’. Failure in that stage would be a catastrophe as it will require one with good knowledge to find the problems and issues of failure. So, when is the right time to test a Fiber installation? How should it be done? What if it Fails? IF things are on your side, a ‘PASS’ is obtained, should the Fiber installed require any maintenance? Attend this session with us to find out the answers.

Featured tools: CFP2-100QI AP (Live Demo)

Transformers play an important role in the electrical power system; therefore, it is imperative to conduct transformer testing on a regular basis. The goal of testing is to confirm the transformer’s ability to continue functioning properly and to reduce the chance of failure. Due to the frequency of testing nowadays, it is inevitable that a solution can be conceived in order to reduce testing time, and ensuring maneuverability. A new era, and solutions brought to you by MEGGER offers unique and outstanding features in Transformer Testing!

Featured tools: TRAX, FRAX, IDAX

When the new IT team is guru-ed by the older ones, the classical method of testing a network would still be something of the past. Time consuming, this requires knowledge of product based CLI and written notes on these operation syntaxes. With the developments of the new Generation range of Hand-Held Testers today, anyone would be qualified to become a Network Technician. If you are still seeking for the fastest way to the root cause of failure, think no further, let us show you what our offers can make your life easier.

Featured tools: LinkRunner G2, AirCheck G2 and nXG (Live Demo)

Topics that will be covered:

• Using the basic features of PIX Connect Software
• Creating measure areas, layouts and alarms
• IR video recordings, snapshots and Process interface setup
• Using the IRmobile App

This free session will revolve around some of the most interesting points like:

• testing procedures
• analysis methods and criteria
• standards related to insulation resistance
• power factor
• turns ratio
• winding resistance
• excitation current
• dielectric frequency response
• sweep frequency response
• transformer dry out, and more!

Do submit your questions in the registration form and/or during the webinar.