Megger EVCA210 Electric Vehicle Charge-point Adaptor

The Megger EVCA210/EVCA210-UK test adaptors are designed to simulate the connection of an electrical vehicle to the charging point under test. Connection of the adapter enables the operator to trigger the charging process by selecting the appropriate Proximity Pilot (PP) and Control Pilot (CP) states.

The adapters allow you to conduct tests using appropriate single or multifunction test instruments on EV charging points in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722. Charging points should be tested as part of the initial installation and repeated periodically.

Key Features:

• Push Button for PE Pre-Test 
• Push button for CP Error “E” simulation
• Push button for PE Error (Earth Fault) simulation
• Rotary switch providing PP State simulation
• Rotary Switch providing CP State simulation
• Type 2 Charging Plug for charging points with panel mounted socket outlet or fixed cable with vehicle connector
• Type 1 Charging Plug for charging points with fixed cable and vehicle connector
• (Example Mitsubishi PHEV) – option for the EVCA210/standard on the EVCA210-UK
• IP54 Rating
• Carrying Case
• CAT II 300V Rating
• Comply with Low Voltage Directive LVD 2014/35
• Accessory for the MFT1700 and MFT1800 series to enable electrical vehicle charge point testing