Megger EZ-THUMP 3 kV and EZ-THUMP 4 kV, model V2

They use the “Easy Go” test system, which is easy to operate, interprets the results and requires minimal training to find faults. On-board is a TDR with a 7.6 km range and arc reflection at 3 or 4 kV respectively for pre-locating. For pinpointing, EZ-Thump offers a surge energy of 500 J, at 1.5 and 3 kV or 4 kV respectively,  d.c. testing for breakdown detection and insulation resistance measurement.

Key features

• Dual stage 500 J surge energy at 1.5 kV and 3.0 kV EZ-Thump 3kV only
• Single stage 500 J surge energy at 4.0 kV EZ-Thump 4kV only
• F-OHM HV interlock to ensure safe earthing
• Battery and AC line operation
• Automatic end-of-cable and fault locating
• Transflective color display
• ARM® Prelocation
• Fault Pinpointing (Thumping)
• Optional Sectionalizing Software*